Del RSS RSS Print

Sand traps

A sand trap is a relatively simple, subsurface construction consisting of an input and an output, the sand trap itself in which the sand settles at the bottom, as well as a storage for the deposited sand. The sand trap serves to remove sand and coarse particles from the rainwater. When the water passes through the sand trap, the water will be slowed down and the heavier particles can fall to the bottom. Sand traps are normally made from concrete of plastic. Sand traps come in different shapes and sizes and are used before the water is conveyed directly to the main sewer or a receiving water body. Furthermore, they are often installed in LAR facilities (facilities for local drainage of rainwater) to remove sand and coarse particles, so that the LAR facility does not clog up. A sand trap increases the lifespan of the LAR facility and results in less expenditure on maintenance and operation.


Sand traps can be used

  • in drains from paved and unpaved areas;
  • in downpipes and similar that are at risk of clogging up with branches, twigs and leaves, etc.;
  • in drainage installations before connection to the pump well and to drain outlets;
  • before oil/petrol traps and grease traps, if the water runoff contains sand, gravel or similar.

 

sand.png

Senest redigeret: 05-02-2014